Spray Pack paint wheels Vinyl Liquid

Lot of 4 sprays to paint tires car with Vinyl Liquid WrapWorkers®. Ideal for painted wheels in car and motorcycle. Maximum quality and finish. Simple and easy to apply: first we clean, then we give you 6 thin coats and let dry. Premieres new tires in less than 1 hour. Never has it been so easy to paint rims. Discover the revolution of the vinyl Liquid.

If you're in this section of our web page is because you like what is striking, indicated in this section, you do it as yours. In Audioledcar, we have a variety of customisable products, and if what you want is to have the tires more special, we recommend this section.

Here you can find a wide variety of products, both color and finish. We always like to advise our customers that dare with these products because they always give a different look to the vehicle, motorbike, etc

Additional information: you may not know that it is the wrapping is a technique that can be applied to any surface, without sanding. Only leaving the surface clean, you can install the vinyl without any type of problem, and then if you want to change it, you just have to `detach

What brand is the work?

The brand with which we work is with WrapWorkers, KingDip, the best brands for the best finish on your vehicle.

What's included in the kit painted wheels with vinyl liquid?

The kit that we have formed with four cans of 400 ml of the color specific to that comes the sprays.

The kit of painting vinyl liquid are for wheels up to 19 inches.

How do I apply the paint vinyl liquid in the tires?

We're going to need several tools (it is not mandatory but we recommend using them to dispose of the product to the maximum, leaving the best possible results).

To get started with the process of the painted rims, we will have to start cleaning up the rim perfectly (such as for example with our specific products cleaning of tires).

*Important* we recommend that you perform the installation of the vinyl liquid in an open area.

Then we can use a deck of cards (if yes, you read it right) a deck of cards that what we do is arrange it to form an inclined plane to avoid when putting the product is spotting of the tire, paint.

Once I have everything ready to go, we started to paint the rim.

Once we finish, we leave the paint to dry on the wheel for 5-15 minutes to be able to go to an ambient temperature of between 20-25 degrees.

We will repeat this process up to 8-9 times (you have to apply so many layers to form the vinyl coating liquid). When we finish with the entire process we will leave to dry tires 24 hours in an open area.

It is dry, we clean up the rim with the product even with pressure washing.

I have left a bit of spray paint, what can I do? Will I be able to re-use?

Once we finish with the paint vinyl liquid, we will return to the boat to clean the mouthpiece of product, and so we can re-use it.

And is that the sprays that we have can last from 3-5 years.

A few years ago, I painted my wheels with your products, but I want to change to another color. How could you do this?

Although it seems a lie, you can remove the vinyl liquid tire scratching and causing it to lift. Once we have the vinyl in our hands, we will be pulling little by little until you go to remove all the product from the rim.

We advise that it is with the hand and not with a tool for that as well not rallemos the rim.

Informal if you have any type of questions regarding installation, color, or any question regarding the product please do not hesitate to contact us by phone, email and even by chat of the web page.