King Dip® Vinyl Yellow Liquid Matte

Vinyl Liquid King Dip® Matte Yellow

King Dip® Vinyl Yellow liquid matte car or motorcycle. Paint peelable spray high quality. It is characterized by its high strength and smooth finish. Spray 400ml ideal for painting to 1.4 square feet of surface.

Additional information vinyl King Dip® spray matte Yellow:
- What is the vinyl liquid?
It is a painting that can be applied directly on any surface and once dry can be removed like a vinyl sticker it were.
- The Vinyl liquid King Dip® matte Yellow is applied directly, without sanding or pre-treat.
- Produces a textured finish smooth and uniform.
- You can wash it with gun pressure.
- Average duration 3-5 years.
- Amount of surface covered by spray 400 ml: 1.2 sq meters.

Summary instructions for use of the spray King Dip® vinyl Yellow liquid matte:

- Clean the surface..
- Apply in an environment between 15 and 25ºC, with the surface completely dry.
- Apply a minimum of 6-9 layers.
- The first layer of the King Dip® Vinyl Yellow liquid matte will be our primer, do it with the past quick to create a thin layer.
- Apply the product to some 20 cm from the piece and as parallel as possible to the surface where we are applying.
- Between layers to wait an average of 10-20 minutes (depends on the ambient temperature and humidity).
- Time of complete drying of the vinyl spray King Dip®: 24 hours in normal conditions.
- Not valid for painting lighthouses, pilots and intermittent. You must cover these areas with masking tape. The time to lift the masking tape is just after applying the last layer, when it is still wet paint.
- Once dry the Vinyl liquid King Dip® Yellow matte you can remove it when you want it, as if a sticker were.
- The final appearance is very similar to a wrap with adhesive vinyl traditional, but the way of applying it is completely different.

Specialists in spray vinyl King Dip® matte Yellow for professional use. If you have any questions please contact us.