Using this interface, camera for Volkswagen ID.3 (E11) (2020-present) we can connect to our original computer, a rear parking camera and also front. Ideal product if you bought the car, and you regret not having put parking camera. Installing this interface camera will be around the team as if it were the original. Note: the screens original require an interface to operate the camera. If the we connect directly without the interface does not read it correctly and may damage the equipment.
Does NOT include the camera. We have many models to choose from on the web. The interface is connected at the navigation module that is located in the glove box. It is not necessary to disassemble the screen. It is necessary to disassemble the glove box. We recommend installation by a professional.
Install rear view camera in VW ID.3 (2020-present)
If your model of VW ID.3 (E11) (2020-present) does not have a rear camera, or you want to add a front camera, with this interface you can do without problem.
It is not necessary to code or configure anything, once installed it will work directly.
The interface does not include the camera
To install a camera VW ID.3 (E11) (2020-present) we only need to:
1-Buy this interface.
2 - A camera RCA cable (not included) from our catalog, either a universal or a specified
3-Ask for the instructions for e-mail and do the installation.
How do I know if this interface is compatible with my VW ID.3 (2020 - present)?
Is module interface is compatible with all models of the VW ID.3 (E11) (2020-present) bearing MIB3 and module in the glove compartment.
That is to say, if, when you open your glove box, you have a module (black box) on top, then if it is compatible.
If you do not have this module, it will not be compatible, since the installation of the interface is done through this module.
Can I install this myself the interface of camera VW ID.3 (E11) (2020-present)?
The installation is not complicated, but if that requires some knowledge of electronics of the car and the time to dismantle the systems of radio/original screen.
The instructions tell you where to connect the interface but do not explain as you have to take out original radio. So if you do not know how to do this better, since Audioledcar we advise you to take it to a professional installer.
Compatibility interface camera VW ID.3 (E11) (2020-present):
Only compatible with the model indicated as MIB3 and module in the glove compartment.
If your model provides IPAS (lines guided), they will appear automatically.
If you have any doubt about the compatibility of this interface, do not hesitate to get in contact with us. You can do so via phone, chat or via email.
rear-view camera in the Volkswagen ID.3 (E11) (2020-present)
Compatible with:
- VW Golf VII/ Golf 8 (2020-Present) Discover medium 10"/ Discover pro 10". 25.4 CM diagonal.
- VW ID.3 (E11) (2020-present) Discover medium 10"/ Discover pro 10". 25.4 CM diagonal.
- VW ID.4 (E21) (2020-present) Discover medium 10"/ Discover pro 10". 25.4 CM diagonal.
- VW Caddy 5 (SD) (2021-present) Discover medium 10"/ Discover pro 10". 25.4 CM diagonal.
- Seat/Cupra Leon (KL) (2020-present) - 10-inch Screen. 25.4 CM diagonal.
- Seat/Cupra Ateca (2020-present) - 10-inch Screen. 25.4 CM diagonal.
- Seat Tarraco (2020-present) (KN2) - 10-inch Screen. 25.4 CM diagonal.
- Cupra Formentor (KM7) (2021-present) - 10-inch Screen. 25.4 CM diagonal.
- Skoda Octavia (2021-present) - 10-inch Screen. 25.4 CM diagonal.
Customer Questions and Answers