Interface camera parking for Cupra Formentor (KM7) (KN2) (2020-present) MIB3

Install rear camera Cupra Formentor (KM7) (2021-present)

If your model of Cupra Formentor (KM7) (2021-present) does not have a rear camera, or you want to add a front camera, with this interface you can do without problem.

It is not necessary to code or configure anything, once installed it will work directly.

The interface does not include the camera

To install a camera Cupra Formentor (KM7) (2021-present) we only need to:

1-Buy this interface.

2 - A camera RCA cable (not included) from our catalog, either a universal or a specified

3-Ask for the instructions for e-mail and do the installation.

How do I know if this interface is compatible with my Cupra Formentor (KM7) (2021 - present)?

Is module interface is compatible with all models of Cupra Formentor (KM7) (2021-present) bearing MIB3 and module in the glove compartment.

That is to say, if, when you open your glove box, you have a module (black box) on top, then if it is compatible.

If you do not have this module, it will not be compatible, since the installation of the interface is done through this module.

Can I install this myself the interface of Cupra Formentor (KM7) (2021-present)?

The installation is not complicated, but if that requires some knowledge of electronics of the car and the time to dismantle the systems of radio/original screen.

The instructions tell you where to connect the interface but do not explain as you have to take out original radio. So if you do not know how to do this better, since Audioledcar we advise you to take it to a professional installer.

Compatibility interface camera Cupra Formentor (KM7) (2021-present):

Only compatible with the model indicated as MIB3 and module in the glove compartment.

If your model provides IPAS (lines guided), they will appear automatically.

If you have any doubt about the compatibility of this interface, do not hesitate to get in contact with us. You can do so via phone, chat or via email.

rear camera in Cupra Formentor (KM7) (2021-present)

Compatible with:

- VW Golf VII/ Golf 8 (2020-Present) Discover medium 10"/ Discover pro 10". 25.4 CM diagonal.

- VW ID.3 (E11) (2020-present) Discover medium 10"/ Discover pro 10". 25.4 CM diagonal.

- VW ID.4 (E21) (2020-present) Discover medium 10"/ Discover pro 10". 25.4 CM diagonal.

- VW Caddy 5 (SD) (2021-present) Discover medium 10"/ Discover pro 10". 25.4 CM diagonal.

- Seat/Cupra Leon (KL) (2020-present) - 10-inch Screen. 25.4 CM diagonal.

- Seat/Cupra Ateca (2020-present) - 10-inch Screen. 25.4 CM diagonal.

- Seat Tarraco (2020-present) (KN2) - 10-inch Screen. 25.4 CM diagonal.

- Cupra Formentor (KM7) (2021-present) - 10-inch Screen. 25.4 CM diagonal.

- Skoda Octavia (2021-present) - 10-inch Screen. 25.4 CM diagonal.