Vogtland offers three types of suspensions:
• In the first place, we have the docks sports, these springs are better in hardness, lowers the height of the vehicle and improve corner entry. Perfect for people who are looking for a easy-to-install and economical, its price ranges between€ 100 and 180€. Between what is cited above, we find advantages as they reduce the sudden movements in braking, makes the body swing less, improve the road-holding, and you get more traction on the drive axle, so that we can deduce that with these springs get a more confident driving.
• On the other hand, their catalogue, we also offer the option of purchasing a sport-tuned suspension Vogtland. This option is the most sold, with this model we will lower the vehicle height between 3 and 4 cm, also increasing quite in hardness. This option is perfect for circuit city and, because it improves the stability and direction of each vehicle.
• As a third option we find the suspension threaded Vogtland, designed for the most demanding customer and are looking to find the limit of your car. With this suspension, in addition to improve in the aspects described above (hardness, stability, driving more sports...) we have the option of controlling in height and is available in a suspension multi-purpose. Has a system to choose the height that we like and that suits our needs at the time of driving.
The suspension vogtland are homologabes, that is to say, they comply with the requirements but tested to be able to pass MOT.
In the first place, that indicate engine brand and model,
You need to look at the maximum weight supported by the car for the front and rear axle. We will choose the one reference that is equal to or superior to those values. Example: front Axle 1120, rear Axle 1160. We will choose a suspension that is higher or equal to those values, and that it most closely matches.
Tab ancient technique: see paragraph GVM/MMA 1ºE (kg) and GVM/MMA 2ºE (KG)
Tab new Technique: see paragraph F. 1.1., you get both values in a row.
In this case it takes the role of a certificate of approval of the suspension that we will provide you, then you should go to a engineer will be asked the following:
• Technical specifications of the vehicle on both sides of all the leaves if there is more than one
• Permit movement of the vehicle on both sides
• Certificate of workshop of the suspension installed.
• Certificate of approval of the suspension.
• Photographs. You can find photos shown in the
• In front of the vehicle
• Rear of the vehicle
• Left side of the vehicle
• Right side of the vehicle
• Photo complete with a meter indicating the final height of the headlamp
• Photo complete with a meter indicating the final height of the rear light
• Detail pictures of the suspension installed. Ideally, in front and rear axle remove the wheel and take a picture to set shock absorber springs installed.
• Photo of the pier (front and rear), where they will see clearly the reference of each one of them written in the dock.
• And finally there are a number of measurements.
With this type of suspensions, we get to the part to reduce the height, we get greater hardness, so that we won widely in sportsmanship and stability.
The delivery time will depend on the stock of the factory, usually at around 7 working days.
Sorry, but we do not offer installation service.