Amplifiers Car

Amplifiers Car Cheap brand KIPUS

The amplifier drive is an electronic component that is responsible for increasing the power and voltage of a signal, in this case the sound, making it much stronger. In the car, this device receives the low-voltage signal, for example: a crossover, equalizer, autoestéreo and epicenter.

The amplifier car can strengthen the signal to move the speakers. There is a variety of speakers on the market, but to give you an idea, the amplifier can make them to vibrate, making them sound very strong.

In addition, there are preamps that are used by lovers of sound to increase the voltage that sounds direct autoestéreo. If what you want is that the sound stronger, it is necessary to install a amplifier in your car. The more powerful one is, the stronger you will hear. This will always and when the speakers are installed to support the power, otherwise damage may occur.

Connoisseurs of this system indicate that the amplifiers car can be measured in watts, the more watts you have “will be better”, but don't always have to be carried away by how big are these amplifiers that incorporate more watts come at very low cost. Since in most cases only increase the power and distorts the sound.

What is important is that the signals that are transmitted are clear and of high quality. The amplifiers can be divided into classes. all ampliciadores car must be connected to a radio car for it to work:

Class: it Is considered that it was one of the best in terms of distribution. Currently in a very difficult to get

Class A/B: Are hybrids, which reflects the best results.

Class D: Work more quickly, something that makes them compact. Are the most fruitful thanks to its internal filters that allow the inaudible sounds to be heard.

Specialists in amplifiers car. Any doubt contact us.

Basic concepts of amplifiers car:

What is a car amplifier?

It is one of the most important components of our sound equipment, is responsible for increasing the power and the voltage of the signal of the sound, aplificándolo, so that we do a lot stronger. In the vehicle, receives the low-voltage signal, as for example an equalizer, autoestéreo...

The amplifiers are measured in watts, while most watss, the more powerful will be the sound issue.

What is more important is that the signal that is transmitted as clear as possible.

What kinds of amplifiers are there?

• Class A: it Is considered that it was one of the best in terms of distribution. Currently in very hard to get.

• Class A/B: Are hybrids, which reflects the best results.

• Class D: Work more quickly, something that makes them compact. Are the most fruitful thanks to its internal filters that allow the inaudible sounds to be heard.

What kind of amplifier should I install?

An important thing to keep in mind when you choose our amplifier is the power that can support the speakers, as if the amplifier gives more watss that support the speakers, in addition to distorting the sound, we can spoil them.

In every amplifier we stock a broad description with the technical characteristics of each product, omnios, power, channels

As an example we have:

AMPLIFIER MONO DIGITAL LINKABLE FURIOUS SERIES - TYPE 1: FS 7000 Amplifier mono digital linkable. 7.000 w rms @ 1 Ω/ 4.500 w rms 2 Ω/ 2.800 w rms into 4 Ω.

How to know how many channels do I need in my amplifier?

Will depend on the vehicle and how to distribute the tracks, in this case we must look to whether high, medium or low are on separate lines or otherwise act in a passive.

Each speaker is a channel, so if you have 4 speakers, we would need an amplifier, 4-channel, always and when not acting in passive, in the case of acting passive, we have to find out how many channels distributes the sound and choose accordingly.

Another important thing to keep in mind is the impedance of each speaker and the watss that supports it, it is very important that the impedance and the watss of the speakers to match the amplifier for proper operation.

What precautions should I take when installing an amplifier?

In the first place, the amplifiers are very hot, so you have to find a place that is spacious and well-ventilated place, another of the precautions that you must take is to place it in an area free from vibration to extend its useful life.

What kind of voltage I should choose when setting up an amplifier?

It will depend on the amps that need it:

• 30 Amps or less: Potafusibles automotive.

• Between 30 and 60 amp: Fuse holder, bubble or AGU.

• More than 60 amp: fuse Holder ANL or blade.

However, as always, the service technician Audioledcar will be happy to assist you and solve any doubt or problem that may arise